![background image](http://html1.mh-extra.com/html/kramer/via-collage/via-collage_user-manual_2000834099.webp)
VIA Collage - Configuring VIA Collage
89
89
To configure a gateway to be managed from VSM:
1. Click
VIA Management
>
VIA Site Management
on the left tabs of the VIA
web pages.
The
VIA Site Management
tab appears.
Figure 65: VIA Web pages
– VIA Site Management Tab
2. Type the
VSM Server IP
.
3. Type the
Gateway ID
that was defined in VSM for this gateway.
4. Click
Validate and Save
.
Changes take effect immediately.
The VIA device (Collage, Connect Pro, Campus, or Go) must be able to
connect to VSM while validating is in progress.
-OR-
Click
Save
for changes to be saved with no validation from VSM.
Since validation is not made immediately, any error entered at this stage
–
like duplication of ID must be corrected manually at a later stage.