18
VA-2H - The EDID Designer
Menu
Item
Description
Command Set Device Mode As if pressing the SELECT button, sets the device mode to
Output
,
Default
or
User
Load EDID from
Loads the EDID to the EDID Designer from
Output
,
Default
,
User or Input
Download EDID to Loads the EDID from the EDID Designer to the
In Port
or
User
memory
Security Mode
With HDCP
passes HDCP encoding,
Without HDCP
turns
off HDCP encoding for 60 seconds only to allow the signal
that is not encoded to pass
Reset
Resets the device
View
Extended View
Expands the window to show the EDID definition tabs
Limited View
Shrinks the window to hide the EDID definition tabs
Edit EDID
Select read only/modify
Byte Viewer
Displays the Byte Viewer window
Help
About
Displays the version of the EDID Designer
6.3.2
Toolbar Buttons
The following table describes the toolbar buttons of the EDID Designer.
Button
Description
Creates a new EDID for editing
Opens an existing EDID from the disk
Saves the current EDID to the disk
Displays the Byte Viewer window to edit the hex codes
Toggles Read-only/Modify, to disallow or allow editing of the EDID
Connects or disconnects the USB connection to the computer
6.3.3
Status Section
The following table describes the status section of the EDID Designer.
Field
Description
Device Status
Indicates if the USB connection has been detected or is disconnected
Input EDID Source
Indicates the EDID source
Security Mode
Indicates if HDCP is active or blocked (for 60 seconds)
Input Signal
Indicates if active or inactive
Output Signal
Indicates if active or inactive
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203