Step 3: Connect the wall plate items:
Unscrew the two screws that attach the
blank plate to the connecting surface and
remove the blank plate (save the two
screws).
Place the required wall plate insert item
over the opening.
Reinsert the two screws to affix the wall
plate insert in position and tighten them.
Step 4: Connect the power socket
Step 5: Connect the cables
Connect the cables to the inside of the unit. Use the self-locking ties to secure the cables via the tie holes.
Step 6: Mount the device
To install the
UTBUS-2xl
underneath the table:
1. Place the unit to the underside of the table and mark the correct location.
2. Insert the four wood screws into the four rim screw holes and fix the
UTBUS-2xl
to the table.
