8
TR-93 / TR-94 - Installing the TR-93 and TR-94
6
Installing the TR-93 and TR-94
This section explains how to install the Audio Transformers, that is:
Connecting the
TR-93
(see
Section
6.1
)
Connecting the
TR-94
(see
Section
6.2
)
6.1
Connecting the TR-93
To connect the
TR-93
, as illustrated in the example in
Figure 3
, do the following:
1. Connect an audio amplifier (for example, the Kramer
914
2x100W Power
Amplifier) to the
TR-93
INPUT
8Ω and COM terminal block connectors by
connecting the:
SPEAKER OUT L+ terminal block connector on
914
to the INPUT 8Ω
terminal block connector on
TR-93
SPEAKER OUT R+ terminal block connector to the INPUT COM
terminal block connector on
TR-93
On the
914
, set the STEREO/BRIDGED MONO
switch to BRIDGED MONO.
2. Connect the OUTPUT to a 70V/100V speaker (for example, the Kramer
Yarden 6-C
Closed-back Ceiling Speaker) by connecting the:
COM terminal block connector to the - speaker connector
70V or 100V OUTPUT terminal block connector to the + speaker
connector
3. Connect the audio amplifier (the Kramer
914
in this example) by connecting:
It to an audio source (not shown in
Figure 3
)
The supplied power cord to the
914
power socket and to the mains
electricity (not shown in
Figure 3
)
For further details, you can download the
914
and
Yarden 6-C
user manuals from our
Web site
Always switch off the power to each device before connecting it to your
TR-93
/
TR-94
. After connecting your
TR-93
/
TR-94
, connect its power
and then switch on the power to each device.
!
