Kramer TP-46N, User Manual

Page: 13 / 18

10 TP-46N - Connecting a Component/UXGA/Audio Distribution System
4.2 Connecting the System in Component Video Mode
To configure a TP-46N component/UXGA/audio distribution system in the
component video mode (using up to 300ft (100m) of UTP cabling), as shown in
Figure 3 , do the following:
1. On the TP-45 or TP-45RC , connect the following:

A component video source (for example, a DVD player) to the Y,
Cb/Pb, Cr/Pr RCA connectors

A digital audio source to the S/PDIF RCA connector
Alternatively, you can connect an analog audio source.
2. On the TP-45 , use the SELECT buttons as follows:

Release the video SELECT button to choose the component video
input

Press the audio SELECT button to choose S/PDIF

Release the audio SELECT button to choose analog audio
3. On the TP-45RC , use the SELECT buttons as follows:

Momentarily press the VIDEO SELECT button. The UXGA LED turns
off when the component video input is selected

Momentarily press the AUDIO SELECT button to toggle between the
S/PDIF and analog audio inputs
The analog audio LED lights when analog audio is selected.
4. On the TP-46N , connect the following:

The Y, C
B
/P
B
, C
R
/P
R
RCA connectors to a component video acceptor
(for example, a plasma display)

The S/PDIF RCA connector to the digital audio acceptor (for example,
the audio input on the plasma display)
Alternatively, you can connect an analog audio acceptor, or you can connect
both.
5. Connect the LINE OUTPUT RJ-45 connector on the TP-45 / TP-45RC to the
LINE IN RJ-45 connector on the TP-46N , via CAT 5 cabling, see Section
4.3
.