Kramer TP-43, User Manual, Page: 7 / 18

Your TP-43 Component – S/PDIF Transceiver
3
3.1 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP)
We recommend that you use shielded twisted pair (STP) cable. There are
different levels of STP cable available, and we advise you to use the best
quality STP cable that you can afford. Our STP skew-free cable, Kramer
BC-SXTP
, is intended for transmitting VGA signals. Our non-skew-free
cable, Kramer
BC-STP,
is intended for digital signals.
The compliance to electromagnetic interference was tested using STP
cables, therefore we recommend using those cables.
Although unshielded twisted pair (UTP) cable might be preferred for long
range applications, the UTP cable should be installed far away from electric
cables, motors and so on, which are prone to create electrical interference.
However, since the use of UTP cable might cause inconformity to
electromagnetic standards, Kramer does not commit to meeting the standard
with UTP cable.
4 Your TP-43 Component – S/PDIF Transceiver
For a description of the TP-43 Component – S/PDIF Transceiver :
Topside, see section 4.1
Underside, see section 4.2
4.1 Your TP-43 Component – S/PDIF Transceiver
Figure 1 , Figure 2 , Figure 3 , and Table 1 define the
TP-43
:
Figure 1: TP-43 Component – S/PDIF Transceiver