![background image](http://html1.mh-extra.com/html/kramer/tp-43/tp-43_user-manual_2002374013.webp)
Connecting the TP-43 Component – S/PDIF Transceiver
9
5. On the
TP-42
, connect the:
Y, U, and V RCA (component video) OUTPUT connectors to
a component acceptor (for example, a plasma display), and
the S/PDIF (digital audio) RCA OUTPUT connector to an
AV Receiver
6. On each unit, connect a 12V DC power adapter to the power socket and
connect the adapter to the mains electricity (not shown in
Figure 6
).
7. If necessary, adjust
1
the appropriate level(s) on
the
TP-41
2
, the
TP-42
3
and
on each of the three
TP-43
units
4
.
1 Insert a screwdriver into the small hole and carefully rotate it, trimming the level
2 That is, the audio level and the Y, U, and V levels
3 That is, the audio level, the audio EQ., the Y, U, and V levels, and the Y, U, and V EQ.
4 That is, the local output: Y, U and V signal levels / compensation equalization levels, and the digital audio S/PDIF level and
compensation equalization level, as well as the line output: Y, U and V signal levels, and the digital audio S/PDIF level
Summary of Contents for TP-43
Page 1: ...Kramer Electronics Ltd USER MANUAL Model TP 43 Component S PDIF Transceiver...
Page 2: ......
Page 4: ......
Page 17: ...13...