KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-310A UXGA Line Receiver/DA
4
3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP)
We recommend that you use Shielded Twisted Pair (STP) cable. There are
different levels of STP cable available, and we advise you to use the best
quality STP cable that you can afford. Our non-skew-free cable, Kramer
BC-STP
is intended for analog signals where skewing is not an issue. For
cases where there is skewing, our UTP skew-free cable, Kramer
BC-XTP
,
may be used. Bear in mind, though, that we advise using STP cables where
possible, since the compliance to electromagnetic interference was tested
using those cables.
Although Unshielded Twisted Pair (UTP) cable might be preferred for long
range applications, the UTP cable should be installed far away from electric
cables, motors and so on, which are prone to create electrical interference.
However, since the use of UTP cable might cause inconformity to
electromagnetic standards, Kramer does not commit to meeting the standard
with UTP cable.
3.3 Recommendations for Achieving the Best Performance
To achieve the best performance:
•
Use only good quality connection cables
1
•
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer
TP-310A
away from moisture, excessive sunlight and dust
to avoid interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables).
4
Your TP-310A UXGA Line Receiver/DA
Figure 1
and
Table 1
define the
TP-310A
:
1 Available from Kramer Electronics on our Web site at
http://www.kramerelectronics.com