Kramer TP-133, User Manual

Page: 11 / 18

8 TP-133/TP-134 - Connecting the TP-133/TP-134
To connect the TP-133 and the TP-134 to create a TP transmitter and
receiver system as illustrated in
Figure 3
1. On the TP-133 , connect:
:

A computer graphics video source (for example, the graphics card on a
laptop) to the PC IN 15 - pin HD connector (M)

An unbalanced, stereo audio source (for example, the audio source on
the computer graphics station) to the AUDIO IN 3.5mm mini jack

The RS-232 device, for example, PC or controller with an RS-232
interface to the RS-232 9-pin D-
sub connector (F)

The balanced, stereo audio source (for example, a DAT - Player) to the
BAL AUDIO IN 5-pin terminal block

If needed, connect a computer monitor and audio
amplifier/loudspeakers to the looping VGA/audio outputs (not sho wn in
Figure 3
2. On the TP-134 , connect the:
)

BAL AUDIO OUT 5-pin terminal block to the balanced, stereo audio
acceptor (for example, an amplifier)

AUDIO OUT 3.5mm mini jack to the unbalanced, stereo audio
acceptor (for example, an AV display system)

PC VIDEO OUT 15- pin HD (F) connector to the video acceptor (for
example, an AV display system)

RS-232 9-pin D- sub connector (M) to the controlled device with an
RS-232 interface
3. Using STP cabling, connect the LINE OUT RJ-45 connector on the TP-133
to the LINE IN RJ-45 connector on the TP-134 (see Section 5.2
4. Connect the power adapters to the power sockets on the TP-133 and
TP-134 , a nd connect the adapters to the mains electricity (not shown in
).
Figure 3 ).