![background image](http://html1.mh-extra.com/html/kramer/tools-tp-45/tools-tp-45_user-manual_2001959005.webp)
Overview
3
3 Overview
The
TP-45/TP-45RC
and
TP-46
are a twisted pair transmitter and receiver
for component video (YUV) or computer graphics video and unbalanced
stereo audio or S/PDIF audio signals. The
TP-45/TP-45RC
transmitter
converts audio and video to a twisted pair signal and the
TP-46
converts the
twisted pair signal back into audio and video signals.
The
TP-45
and
TP-45RC
have two SELECT buttons that let you choose
the video signal input (XGA
1
or component) as well as the audio input
(digital or analog signal). By selecting the required video input signal, the
TP-45
or
TP-45RC
with the
TP-46
can constitute either a component video
(Y, C
B
/P
B
,
C
R
/P
R
) or an XGA video – audio transmitter / receiver system
2
:
•
If XGA is selected, the
TP-45
or
TP-45RC
receives an XGA signal
3
and transmits it over the twisted pair cable to the XGA output on the
TP-46
receiver
•
If component video is selected, the component video signal
3
is
transmitted over the twisted pair cable to the COMP outputs on the
TP-46
receiver
•
The analog audio or S/PDIF (digital audio)—as selected via the audio
SELECT button—is transmitted together with the video signal over the
twisted pair cable to the
TP-46
receiver
•
The
TP-45RC
can execute these control functions also remotely using
simple pushbuttons
The audio signal is distributed simultaneously to the analog or digital audio
outputs.
Additional
TP-46
units can be connected via the
TP-46
LINE OUT twisted
pair connector, to extend the range of the output signals
4
.
The
TP-45
Component/XGA – Audio Transmitter
features:
•
Transmission range of more than 300ft (more than 100m)
•
YUV
5
input on 3 RCA connectors and a computer graphics input on a
15-pin HD (F) connector
1 The term XGA used throughout this manual implies resolutions exceeding UXGA
2 The TP-45/TP-45RC and TP-46 do not convert the video signal format. Thus computer graphics sources must be routed to
computer graphics outputs. Similarly, component video sources must be routed to component video outputs
3 And audio signal
4 You can connect up to three additional TP-46 units, adding a total cable length of up to 300 meters. The video quality may
be reduced if further units are connected
5 Also known as Y, Cb, Cr, or Y, B-Y, R-Y, or Y, Pb, Pr