Connecting a Component/XGA – Audio Distribution System
13
5.2
Connecting the System in Component Video Mode
To configure a
TP-45/ TP-45RC/TP-46
Component/XGA – Audio
distribution system
1
in the component video mode, as the example in
Figure 7
illustrates, do the following:
1. On
the
TP-45
or
TP-45RC
, connect the following:
•
A component video source (for example, a DVD player) to the
Y, Cb/Pb, Cr/Pr RCA connectors
•
A digital audio source to the S/PDIF RCA connector
2
2. If necessary, set the HS and VS switches
3
, on the
TP-45
underside.
3. On
the
TP-45
, use the SELECT buttons as follows:
•
Release the video SELECT button to choose the component
video input
•
Press the audio SELECT button to choose S/PDIF
•
Release the audio SELECT button to choose analog audio
4. On
the
TP-45RC
, use the SELECT buttons as follows:
•
Momentarily press the VIDEO SELECT button. The UXGA
LED turns off when the component video input is selected
•
Momentarily press the AUDIO SELECT button to toggle
between the S/PDIF
4
and analog audio inputs
5. On
the
TP-46
, connect the following:
•
The Y, C
B
/P
B
,
C
R
/P
R
RCA connectors to a component video
acceptor (for example, a plasma display)
•
The S/PDIF
RCA connector
5
to the digital audio acceptor (for
example, the audio input on the plasma display)
6. Connect the LINE OUTPUT RJ-45 connector on the
TP-45/TP-45RC
to
the
LINE IN RJ-45 connector on the
TP-46
, via twisted pair cabling, see
section
5.4
.
7. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity on both
6
the
TP-45/TP-45RC
and the
1 Using up to 300ft (100m) of UTP cabling
2 Alternatively, you can connect an analog audio source
3 By default, both switches are set down (for normal V SYNC and H SYNC polarity)
4 The analog audio LED lights when analog audio is selected
5 Alternatively, you can connect an analog audio acceptor, or you can connect both
6 If you cannot connect the power to both the TP-45 and TP-46, connect it to the TP-46 only. If more than one TP-46 is
connected, connect the power to each TP-46 unit
