![background image](http://html.mh-extra.com/html/kramer/tools-tp-41/tools-tp-41_user-manual_2001956010.webp)
Connecting a Component – S/PDIF Distribution System
7
5 Connecting a Component – S/PDIF Distribution System
To
configure a
TP-41
/
TP-42
Component – S/PDIF distribution system (for
example, for high quality home cinema), as Figure 5 illustrates, do the following:
1. On the
TP-41
, connect a component video source (for example, a DVD
player) to the:
Y, U, and V RCA (component video) INPUT connectors
S/PDIF (digital audio) RCA INPUT connector
2. On the
TP-42
, connect the:
Y, U, and V RCA (component video) OUTPUT connectors to a
component acceptor (for example, a plasma monitor)
S/PDIF (digital audio) RCA OUTPUT connector to an AV-Receiver
3. Connect the
LINE OUT
connector of the
TP-41
to the
LINE IN
connector
of the
TP-42
, via UTP cabling (maximum range of up to 300ft (100m)).
4. On each
TP-41
/
TP-42
unit:
Connect a 12V DC power adapter to the power socket and connect the
adapter to the mains electricity
If necessary, adjust
1
the appropriate level(s), by inserting a screwdriver
into the small hole and carefully rotating it
Figure 5: Component – S/PDIF Distribution System up to 300ft (100m) UTP Cable
1 On the TP-41, adjust the audio level and/or the Y, U, and V levels. On the TP-42, adjust the audio level, the audio EQ., the
Y, U, and V levels, and/or the Y, U, and V EQ.