TBUS-204
Quick Start
P/N: 2 9 0 0 - 3 0 0 9 1 3 QS
Rev: 3
Scan for full manual
TBUS-204 Quick Start Guide
This guide helps you install and use your TBUS-204 for the first time.
www.kramerav.com/manual/TBUS-204
to download the latest user manual
Step 1:
Check what’s in the box
TBUS-204
Pop-up Table Connection Bus
1 Clamps set
1 User manual
1 Quick start guide
1 Metal cut-out template
Step 2: Get to know your TBUS-204
#
Feature
Function
1
Pop-up Lid
Covers the connecting surface, leaving the table surface neat and tidy.
2
Connecting Surface
See following graphic.
3
Outer Rim
Fits over the table surface.
4
Mini Latch
Enables closing and opening the lid by applying slight pressure.
5
Rubber Protectors (x2)
Ensures gentle tightening to the table’s underside.
6
Locking Butterfly Nuts (x2)
Tighten to lock the mounting screws.
7
Mounting Screws (x2)
For securing the
TBUS-204
to the table.
8
Mounting Butterfly Nuts (x2)
Tighten to secure the unit to the table’s surface.
9
Mounting Clamps (x2 units)
Place in the clamp slits after inserting the enclosure into the table
– for securing
the unit to the table surface.
10
Mounting Clamp Slits (two sets
on each side)
Insert the mounting clamps to the slits when installing the
TBUS-204
.
11
5V-2A USB Charging Port
Use to charge a device.
12
5A/125V Power Connector (x2)
Connect to up to two US power consuming devices simultaneously.
When a single power socket is connected, consumption should not exceed 5A.
When both power sockets are connected, the total consumption should not exceed 6A.
13
5V-2A USB Charging Port
Use to charge a device.
