![background image](http://html1.mh-extra.com/html/kramer/tbus-202xl/tbus-202xl_user-manual_2000868016.webp)
TBUS-202xl - Installing the TBUS-202xl
13
13
5.3
Inserting the TBUS-202xl through the Cut-Out Opening
To install the
TBUS-202xl
, do the following:
1. Carefully insert the unit into the prepared opening.
2. Take the support clamps under the table and place them into the support
clamp grooves at the desired height (on both the front and rear sides of the
unit).
3. Make sure that the upper outer rim is situated parallel to the edge of the
table.
4. Insert the table securing screw through the holes in the mounting clamps
and tighten the
TBUS-202xl
to the table.
5.4
Connecting the Cables
1. Connect the appropriate cables from underneath.
2. Secure the cables.
Do not keep the cord too tight or too loose.
Once you have connected the unit to the mains power and connected the proper
cables, you may use the unit.