KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the SV-551 SummitView™ Processor/Switcher
8
# Feature
Function
4
INP
UT
B
ut
to
ns
(u
sed
for
tes
ting
)
VIDEO 1
Press to select the video source 1
5
VIDEO 2
Press to select the video source 2
6
PC 1
Press to select the PC 1 source
7
PC 2
Press to select the PC 2 source
8
PC 3
Press to select the PC 3 source
9
PROGRAM
Connector
Connect to a computer for configuration of the unit (a USB cable is
provided with the Controller)
10
ETHERNET
Connector
Connects to the PC or other Controller through computer networking,
for control and configuration of the unit. Default IP settings:
Address 192.168.1.39, port 50000, subnet mask 255.255.255.0
11
K-NET
1
PIN GND is for the Ground connection;
PIN B (-) and PIN A (+) are for RS-485,
and PIN +12V is for powering the unit.
For details of how to connect K-NET, see
Connector
Figure 14
12
LINE OUT
Terminal Block
Connect to an external audio amplifier
13
TERM
DIP-switches
DIP-switches for line termination of the unit (DIP-switch 1 is for KNET,
DIP-switch 2 is for RS-485)
14
RS-232
DB 9M Port
Connects to the projector for projector control
15
PROJECTOR
15-pin HD
connector
Connects to the projector
16
SPKR
Terminal Block
Connect to the left and right speakers
17
AUX IN
Terminal Block
Connect to an additional audio source for mixing it with the audio line
level input (talk over)
18
10V VOL
Terminal Block
Connect to an external potentiometer on a wall plate
2
19
to adjust the
volume of the speakers
RELAY
Terminal Block
Connect to a room item (such as lighting, screen settings, blinds, and
so on)
20
RS-232
Terminal Block
Connect to the RS-232 connector on the A/V equipment or a PC or other
Serial Controller
21
RS-485
Terminal Block
Connect to the RS-485 detachable terminal block on a switcher or PC
22
IR OUT
Terminal Block
Control a machine via an IR Emitter
23
CV
RCA
Connector
Connect to the composite video 1 input of the projector
24
CV
RCA
Connector
Connect to the composite video 2 input of the projector
25
s-Video
4p
Connector
Connect to the s-Video
input of the projector
26
P
R
RCA
Connector
27
Y
RCA
Connector
Connect to the component video input of the projector
28
P
B
RCA
Connector
29
VIDEO 1
RJ-45 Connector
Connect to the video 1 source via the CAT 5 socket on the rear of the
SV-302 or SV-303
1 K-NET is a proprietary Kramer protocol for interconnecting Kramer units
2 For example, the RC-63A
Summary of Contents for SV-551
Page 32: ...ADA Requirements 29...