SPK-W611 - Installing the SPK-W611
5
5
Installing the SPK-W611
Before installing the speakers, you can paint them to match the surrounding
furnishings (see
Section 5.4
). If you choose not to paint the speakers, you can
install them directly.
This section explains how to:
•
Prepare for installation (see
Section 5.1
)
•
Install the speaker wires (see
Section 5.2
)
•
Install the mounting brackets (see
Section 5.3
)
•
Paint the speakers, if required (see
Section 5.4
)
5.1
Preparing for Installation
Before installing the speakers, check that you have all the required tools:
•
A Philips-head (#2) screwdriver
•
A power drill
•
Eye and ear protection and a dust mask
•
A 2.5mm (0.1”) wood bit or a 6mm (0.24”) masonry bit
5.2
Installing the Speaker Wires
To install the wires, do the following:
1. Make sure that the amplifier power is OFF.
2. Prepare the wires for the speakers:
Use two stranded speaker wires (it is recommended to use the Kramer
BC-2S cables) of similar length for achieving high quality sound
Measure the length from each speaker to the amplifier, and add some
access wire length to easily remove the speakers from the bracket
without having to disconnect the input wires
3. Prepare the mounting bracket installation (see section
5.3.1
).
