8
SPK-W611 - Installing the SPK-W611
5.3.2
Installing the Speakers to the Bracket
To install the speakers to the bracket, do the following:
1. Screw the bracket to the speaker using
the bracket knob (remove the knobs and
then screw them back to the speaker
after placing the bracket).
2. Align the bracket with the attached
speaker to the inserted screws and hang
it, letting the screwhead slip into the
narrow side of the keyhole opening (in
the same way you can also hang the
speakers horizontally).
Check, by gently pulling the speakers,
that the speakers are sitting well on the
mounting screws and tighten them if
required.
Check that the speakers are well aligned
against the wall, and tighten if necessary.
3. Loosen the bracket knobs slightly to set
the speaker in the desired angle and
then retighten.
