12
SL-12 - Operating the SL-12
2. At the other end, connect the Internet to a PC running Site-CTRL.
After connecting the Ethernet port, you have to install and configure it. For detailed
instructions on how to install and configure your Ethernet port, see the
K-Config
Guide
4.6
Connecting the K-NET Port
The K-NET port is wired as shown in
Figure 6: K-NET Pinout Connection
5
Operating the SL-12
You can operate your
SL-12
using:
An RC family remote controller:
To operate your device using an RC remote controller, see the Kramer
K-Config
Guide
The optional
RC-4
infrared remote control transmitter:
The RC-4 is configured via the Kramer K-Config software
To operate your device using the infrared remote controller, see the User Manual
packed with the remote controller
A PC running
Site-CTRL
control software:
To operate your device using
Site-CTRL
, see the
Site-CTRL
and
Web
Access
Online User Guide