Using the SG-6005xl Genlock Multistandard SPG/Audio Generator
KRAMER: SIMPLE CREATIVE TECHNOLOGY
10
#
Menu Item
Submenu
Default Value
FACTORY RESET
Press ENTER to reset the
GENLOCK parameters
GENLOCK MODE
HV only, HV and SC
HV only
GENLOCK TIMING HORIZONTAL
from -31968ns to
+31968ns (in 37ns steps)
1
0
GENLOCK TIMING VERTICAL
from -625 line to +625 line 0
GENLOCK EXTRA V SHIFT
-1 frame, 0 frame, +1
frame
0 frame
GENLOCK SC PHASE SHIFT
from -185
°
to +185
°
0
NON-GENLOCK or HVmode
SCHphase
from -64
°
to +63
°
0
8
TEST 1 PROGRAMMING
TEST 2 PROGRAMMING
9
ADDRESS OF machine
First, Second
First
7.2 Locking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via the
front panel buttons, lock your
SG-6005xl
. Unlocking releases the protection
mechanism.
To lock the SG-6005xl:
•
Press the LOCK button for more than three seconds, until the LOCK button
lights
The front panel is locked. Pressing a button will have no effect other than
causing the LOCK button to flash
1
To unlock the SG-6005xl:
•
Press the lit LOCK button for more than three seconds, until the LOCK
button no longer lights
The front panel unlocks
7.3
Remotely Operating via RS-232
You can remotely operate the
SG-6005xl
via RS-232 using a device such as a PC.
To connect a PC to the SG-6005xl
unit using the Null-modem adapter
provided with the machine (recommended):
•
Connect the RS-232 9-pin D-sub rear panel port on the
SG-6005xl
unit to
the Null-modem adapter and connect the Null-modem adapter with a 9-wire
flat cable to the RS-232 9-pin D-sub port on your PC
To connect a PC to the SG-6005xl
unit without using a Null-modem adapter:
•
Connect the RS-232 9-pin D-sub port on your PC to the RS-232 9-pin D-sub
rear panel port on the Master
SG-6005xl
unit, as illustrated in
Figure 3
1 Warning that you need to unlock to regain control via the front panel
