![background image](http://html1.mh-extra.com/html/kramer/sd-7401/sd-7401_user-manual_2001611008.webp)
KRAMER ELECTRONICS LTD. 7
Figure 3: SD-7401 Front/Rear Panel Features
Table 1: SD-7401 Front/Rear Panel Features
Feature
Function
1.
POWER
Power ON/Off Switch, illuminates when toggled.
2.
OUTPUT
Video Component output format selector buttons (YUV or
RGB)
3.
SDI
SDI input BNC connector
4.
Y/G, B-Y/B, R-Y/R
Video Component output BNCs
5.
Y/C
Y/C (s-Video) analog output on a 4P connector
6.
CV
Composite video output on a BNC
7.
SETTING
Dip switch bank for machine setting
8.
POWER SOCKET
A socket with fuse for connecting the mains power cord
7 INSTALLATION
8
CONNECTING TO DIGITAL VIDEO DEVICES
Digital video sources and output devices may be connected to the SDI to Analog converter through
the BNC type connector on the back panel. SDI signals are very high frequency carrying signals, and are
sensitive to cable quality and length. SDI signals suffer from the “cliff effect” - where the signal looks
good after traveling a certain cable length, but when the line is extended just a few inches more - the
signal crashes completely, without any warning. Keep the length of the cables at the absolute minimum
required!