![background image](http://html1.mh-extra.com/html/kramer/scalemagix-2-vp-740hc/scalemagix-2-vp-740hc_user-manual_2002172037.webp)
Operating the VP-740HC via the OSD MENU Screen
33
8.6 Operating via the Infra-red Remote Control Transmitter
You can control the
VP-740HC ScaleMagix 2 ™ via the remote transmitter:
Table 5: VP-740HC Remote Transmitter Functions
Keys
Function
INFO
Defines the main source, PIP source, output mode,
as well as the firmware version number
ON/STANDBY Cycles power
FREEZE
Freezes the output video image
VIDEO
Cycles between selecting the AV1 or AV2 source
S-VIDEO
Cycles between selecting the YC1 or YC2 source
COMPONENT Cycles between selecting the COMP.1 or COMP.2
source
ASPECT
Toggles between each of the following Aspect
Ratios (see Figure 14 to Figure 18 inclusive):
Anamorphic (displays the aspect ratio (usually
16:9)), Virtual Wide (anamorphic plus non-linear
scaling), Letterbox (the vertical line is expanded to
full screen—it is assumed that there are two bands
of black, top and bottom of the screen), Native (lets
you set the native resolution according to the
specifications of the Plasma screen or projector), 4:3
Output (the width to height ratio is 4:3), User Define
DVI/VGA
Cycles between selecting the DVI or VGA source
PIP
Selects the PIP function (see section 7.1)
MEMORY 1
Loads Setting 1
MEMORY 2
Loads Setting 2
MEMORY 3
Loads Setting 3
PICTURE
Toggles between each of the following modes:
Normal (average setting), Presentation (higher black
level), Cinema (higher white balance)
CONTRAST
Displays the contrast adjustment window
COLOR
Displays the saturation adjustment window
SHARP
Displays the sharpness adjustment window
BRIGHT
Displays the brightness adjustment window
DIRECTION
(5 separate
keys)
Maneuver within an OSD screen and/or resize the
PIP via the Up and Down DIRECTION keys (when
the Label
is ON and the PIP is enclosed by an
orange frame (see section 7.1)) and/or move the PIP
(when the Label
is OFF and the PIP is not enclosed
by an orange frame (see section 7.1))
AUTO GAIN
Automatically adjusts the brightness and contrast
MENU
Displays the OSD Menu screen (as Figure 7
illustrates) and locks/unlocks the front panel
Figure 43: Remote Transmitter