![background image](http://html1.mh-extra.com/html/kramer/scalemagix-2-vp-740hc/scalemagix-2-vp-740hc_user-manual_2002172015.webp)
Understanding the PIP Feature
11
When the Label
is ON
1
(see Figure 30), the PIP is enclosed by an orange
frame, and the OSD PIP status appears superimposed over the top right corner
of the screen for a few seconds, as Figure 4 illustrates. After a few seconds
2
,
the orange frame and the OSD PIP status automatically disappear
3
.
Activating the PIP subsequently cycles between the PIP with the orange
frame and no PIP.
Figure 4: OSD PIP Status
7.2 PIP Characteristics
You can determine the following PIP characteristics:
PIP Source
PIP Size (1/4, 1/9, 1/16, 1/25, Split or User Define)
Horizontal and Vertical position, placing it anywhere on the screen
7.3 Resizing the PIP
To resize the PIP (1/4, 1/9, 1/16, 1/25, Split or User Define):
When the Label
is ON and the PIP is enclosed by an orange frame, press
the Up and/or Down DIRECTION keys on the infra-red remote control
transmitter or the UP and/or DOWN front panel scroll buttons
Use the OSD Menu buttons
1 The information prompt will appear while you change the source or adjust the image. For example, you can resize the PIP
via the infra-red remote control transmitter (see section 7.3)
2 By default, 20 seconds. But you can reset the timeout (from 3 to 60 seconds)
3 Trying to activate the PIP again while the PIP is still enclosed by an orange frame deactivates the PIP