Using Your Universal Room Controller
7
5 Using Your Universal Room Controller
1
This user manual is applicable once the unit is installed and configured
2
. The
installation process is not detailed in this user manual
3
, and includes:
Setting up the labels on the buttons, according to your specific
requirements
4
Hardware installation
Connecting the inputs and the display
Configuration via the Windows®-based configuration software and/or
the IR learner
The universal room controller is very easy to use, as the example in Figure 6
and Table 6 defines
5
:
1 From this section on, all the information is relevant to the RC-8RK and RC-8RKL units, unless noted otherwise
2 By authorized Kramer technical personnel or by an external system integrator
3 Refer to the separate online “RC Configuration and Installation Guide” at http://www.kramerelectronics.com
4 It is recommended to place labels on the buttons prior to installing the unit, as this involves removing the face plate
5 Your RC-8RK/RC-8RKL was installed and configured to suit your specific requirements. This example describes how to
setup one of an unlimited number of available setups for the system
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
