KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using Your Universal Room Controller
10
5.1 Operating the RC-8RK
In the following example
1
that is illustrated in Figure 8, the
RC-8RK
is
labeled with specific functions and each button is programmed
2
to perform
several tasks
3
as defined in Table 7.
Each button may be assigned with up to 15 commands.
Table 7: The Commands Configuration
The
Label
The Macro Sequence
ON
Power up the projector
Power up the power amplifier
Power up the DVD player
Power up the video player
Roll down the projector screen
Turn on the speakers
1 minute delay [for the projector to
heat up]
Turn lights off
The projector selects the PC input
OFF
Turn lights on
Power down the projector
Power down the power amplifier
Stop the DVD player
Power down the DVD player
Stop the video player
Power down the video player
Roll up the projector screen
Turn off the speakers
DVD
Stop the video player
The projector selects the DVD
input
Play the DVD
VCR
Stop the DVD
The projector selects the VCR
input
Play the VCR
PC
Stop the DVD
Stop the VCR
The projector selects a PC input
Vol UP
Power amplifier volume up
Vol
DOWN
Power amplifier volume down
ON
OFF
DVD
PC
VCR
Vol
UP
Vol
DOWN
HELP
DESK
Figure 8: RC-8RK Labels Setup
HELP
DESK
Call for technical assistance
1 This is only one example among numerous possibilities, each button can be configured as required
2 By the technical installer
3 A macro sequence, including up to 15 commands per button, carried out one after the other
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
