KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
associated equipment—in any room (such as classrooms, boardrooms, or
auditoriums). They streamline operations and simplify control by integrating
audio, video, and computer-video sources into a centralized system.
The Kramer
Universal Room Controllers include:
An Ethernet port for configuration and control
1
Configurable backlit buttons
2
to set up any supported
3
command
Two bidirectional RS
-
232 wired serial ports, for universal display (for
example, projectors) and switcher control, and one RS
-
485 serial port
Two relays for the simplified and centralized control of room functions
(such as lighting, closing blinds, screen settings, and so on)
Two IR control ports
An IR-learner for the customized control of external sources, receiving the
IR commands from different remote transmitters without the need for an
external IR remote control unit
Macro mode operation, for programming up to 15 commands with the
press of a single button. The
RC-6IR
(with six buttons) has a total of 90
commands and the
RC-8IR
(with eight buttons) has a total of 120
commands
Support for firmware upgrade
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
your Kramer Universal Room Controllers away from moisture,
excessive sunlight and dust
Caution
– No operator-serviceable parts inside unit.
Warning
– Use only the Kramer Electronics input power
wall adapter that is provided with this unit
4
.
Warning
– Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Of up to five machines with unique IP addresses
2 Six buttons for RC-6IR, and eight buttons for the RC-8IR
3 To be configured by the system integrator only
4 For example: model number AD2512C, part number 2535-000251
