![background image](http://html.mh-extra.com/html/kramer/pt-4irex/pt-4irex_user-manual_2002059009.webp)
6
PT-4iREX - Connecting the PT-4iREX
4
Connecting the PT-4iREX
Always switch off the power to each device before connecting it to your
PT-4iREX
. After connecting your
PT-4iREX
, connect its power and
then switch on the power to each device.
To
connect the
PT-4 iREX
IR Repeater
, as illustrated in the example in
Figure 3
,
do the following:
1. Connect the OUT (up to four IR receivers) 3.5mm mini connector (from 1 to
4) to the following IR receivers via the IR emitter cable (see
Figure 2
):
Stick the IR emitter to the IR receiver window (usually located on the front panel of the
video player).
OUT 1 to a DVD player
OUT 2 to a video player
OUT 3 to an amplifier
OUT 4 to a plasma display
2. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
Figure 2: Connecting the IR Emitter
To operate any of the connected machines, use a remote control (the machine’s
original remote control or a universal remote control) pointed to the IR Repeater
(or the external IR remote receiver, model C-A35M/IRR-03) that is located at a
place of your convenience. The IR signal from the remote control is transmitted
from the
PT-4 iREX
, via an IR emitter cable, to the appropriate machine.
i
IR Emitter
Summary of Contents for PT-4iREX
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL PT 4iREX IR Repeater P N 2900 000283 Rev 5 ...
Page 2: ......
Page 12: ......