PSE-2 - Connecting the PSE-2
7
7
2. Connect the LAN + POE 1 RJ-45 connector on the rear panel of the
PSE-2
to the HDBT receiver, (for example, the
TP-588D
).
3. Connect the supplied power adapter to the
PSE-2
and plug the power
adapter into the mains supply.
The
PSE-2
provides power to both the HDBT transmitter and receiver.
5.1
Wiring the RJ-45 Connectors
This section defines the TP pinout, using a
straight
pin-to-pin
cable with RJ-45
connectors.
EIA /TIA 568B
Figure 4: TP PINOUT
PIN
Wire Color
1
Orange / White
2
Orange
3
Green / White
4
Blue
5
Blue / White
6
Green
7
Brown / White
8
Brown
Summary of Contents for PSE-2
Page 1: ...USER MANUAL MODEL PSE 2 10Gb POE Injector P N 2900 300452 Rev 1 www kramerAV com...
Page 2: ...This page is intentionally left blank...
Page 3: ......
Page 13: ......
