KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the Video Isolator
10
5.3 Connecting the OC-4 Quad Channel Video Isolator
To connect
1
the
OC-4
, as illustrated in the example in Figure 6, do the
following
2
:
1. Connect up to four video sources:
A video source (for example, a camcorder) to the CHANNEL 1
INPUT BNC connector
A video source (for example, a camcorder) to the CHANNEL 4
INPUT BNC connector
2. Connect up to four video acceptors:
The CHANNEL 1 OUTPUT BNC connector to a video acceptor (for
example, a display)
The CHANNEL 4 OUTPUT BNC connector to a video acceptor (for
example, a projector)
3. Connect the power.
4. If required:
Adjust
3
the video input and/or output
GAIN and HF levels
Press or release the ground input and/or output GND
buttons
1 You do not have to connect all the inputs and outputs
2 Switch OFF the power on each device before connecting it to your OC-4. After powering up your OC-4, switch on the
power on each device
3 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level