Kramer MV-6, User Manual

Page: 27 / 75

MV-6 - Operating the MV-6 Remotely 23
7 Operating the MV-6 Remotely
The MV-6 can be operated remotely using the Kramer MV-6 Controller
software via the:

RS-232 serial port (see Section
‎7.1
)

Ethernet port (see Section
‎7.2
)
7.1 Operating the MV-6 via the RS-232 Serial Port
Kramer offers free control software that allows you to operate the MV-6
remotely via a PC or serial controller using serial commands (see
Section
‎11
). This software can be downloaded from
http://www.kramerelectronics.com/support/product_downloads.asp .
7.2 MV-6 Controller Software
For details regarding connecting to the Ethernet port on the MV-6 , see
Section
‎5.2
.
The Controller software requires the following:

Windows™ XP, Vista or Windows™ 7

Microsoft .Net Framework version 3.5
To install the Controller software, download the software and run the setup file.
After installation, running the Controller software for the first time displays a
window similar to that shown in Figure 8 .