Kramer Electronics Ltd.
MV-4X
– Using Embedded Web Pages
31
9. Set the analog audio output source (Output A or Output B).
10. Adjust the audio output volume, or mute audio.
Outputs are adjusted.
Saving Presets
You can store up to 4 configuration presets. Presets can be recalled via the Multi-view tab
(see
Defining the Multi-View Parameters
).
Presets include the window position, routing state, window source, window layer, aspect ratio,
border and border color, rotation state and window state (enabled or disabled).
To store a preset:
1. In the Navigation List, click
AV Settings
. The AV Settings page appears (see
2. From the top menu bar, select
Matrix
. The Matrix page appears and the gray indication
to the right of the Matrix mode turns green.
3. Configure the operation mode settings.
4. From the
Save to
drop-down box, select a Preset.
5. Click
SAVE
.
A preset is saved.
Defining the Matrix Mode Parameters
MV-4X
enables Configuring the Matrix Mode parameters and then switching inputs via
seamless video cuts.
To set the inputs and outputs in the matrix mode see:
•
•
When HDR10 is used, some limitations may occur.
MV-4X
enables performing the following actions in the Matrix mode:
•
Switching an input to an output
•
Defining Switching Fade In and Out Settings
•
Once defined, you can set the Matrix mode to the active mode.
Switching an input to an output
A green indication light next to an input or output indicates that an active signal is present on
these ports.