Kramer MODULAR TBUS-1A, User Manual

Page: 7 / 23

4 TBUS-1A - Your TBUS-1A Enclosure
4 Your TBUS-1A Enclosure
Figure 2: TBUS-1A Enclosure Top View
# Feature Function
1 Black/Brushed Clear
Textured Lid
Includes an opening for cable pass-through; covers the inner
frame, leaving the table surface neat and tidy
2 Outer Rim Fits over the table surface.
A protective rubber guard protects the outer rim during shipping.
Remove it before installing the unit
3 Enclosure Inserted into the table cut out
4 Height Adjustment
Screw Holes (TOOLs)
The screw holes are used for installing Kramer TOOLs
5 Tie Holes Insert the self-locking tie through the holes to fix the pass-through
cables to the inside walls of the unit (6 pairs of holes, 3 for the
front panel and 3 for the rear panel)
6 Bracket Slits Located on the front and rear panels, and on both sides of the
unit. For attaching the two mounting brackets on opposite sides
7
Ta
bl
e C
lam
pi
ng S
et
Rubber
Protectors
Protect the table surface when mounting the unit and ensure soft
tightening to the table underside (one on each side)
8 Locking Butterfly
Screws
Tighten to lock the mounting butterfly screw (one on each side)
9 Mounting
Butterfly Screws
Tighten to secure the unit to the table surface (one on each side)
10 Mounting
Brackets (2 units)
Place in the bracket slits after inserting the enclosure into the table
– for securing the unit to the table surface (one on each side)
11 Inner Frame Height
Adjustment Screw
Holes
The screw holes on each side panel are used for adjusting the
height of the inner frame (eight height adjustment screws are
included)