![Kramer MODULAR TBUS-1A User Manual Download Page 15](http://html1.mh-extra.com/html/kramer/modular-tbus-1a/modular-tbus-1a_user-manual_2000778015.webp)
12
TBUS-1A - Installing the TBUS-1A
5.2
Installing the Inner Frame
To install the inner frame:
1. Place the inner frame inside the
TBUS-1A
enclosure.
2. Set the required height using your fingers to bring the inner frame to the
desired position, screw and tighten it in place using the height adjustment
screws (supplied with the inner frame).
i
Inner frame kits come with assembly instructions.
5.3
Cutting an Opening in the Table
To cut an opening in the table:
1. Place the included cut out template (that is included with your
TBUS-1A
) on
the surface of the table exactly where you want to install the
TBUS-1A
.
2. Attach the template to the table with the included screws (if using the cut out
template).
3. Following the
inside
edge of the template, cut a hole in the table surface
with a sabre or keyhole saw according to the dimensions shown in
Figure 4
(not to scale).
i
The thickness of the table should be 76.2 mm / 3 inches or less.
Figure 4: Cut out Dimensions
Summary of Contents for MODULAR TBUS-1A
Page 2: ......