Kramer Electronics Ltd.
KT-107, KT-107RB - Upgrading the Firmware
33
Prepare the KT-107 for Firmware Upgrade
To prepare the KT-107:
1. Verify that the battery is at least 70% charged.
2. Disconnect the panel from its mount (see
).
3. Power-off the panel (from behind
or via the Kramer control button
on the front of
the
Touch Panel
).
4. Connect the PC USB port directly to the micro-USB port
on the rear of the
KT-107
(do not use the port on the mount) via a USB cable with data-transfer-capabilities.
You can connect several
Touch Panels
to upgrade simultaneously.
Carefully place the
KT-107
in a way that does not cause damage to the USB cable or port.
Upgrade the Firmware via PC
To upgrade the firmware:
1. In the
‘KT FW Upgrade Tool’ folder, double-click ‘Kramer Touch Panel FW Upgrade
Tool.exe
’.
The FW Upgrade Tool window appears:
Figure 33: Firmware Upgrade Tool