To attach KRT-3
to a TBUS:
1. From under the table, slide the
KRT-3
onto one of the side
walls of the TBUS.
Make sure that the fixed cable is directed downwards and
the retracting cable is directed upwards.
2. Use the appropriate Allen key to fix the
KRT-3
by tightening
the Allen bolt firmly in place and pass the retracting cable
end through the cable pass-through bushing.
The
KRT-3
is now firmly fixed in place.
Attaching KRT-3 (as a Standalone) to the Underside of a Table
The thickness of the table should be at least 18mm so as not to
damage the table. Kramer Electronics is not responsible for any
damage caused to the table.
To attach KRT-3 to the underside of a table:
1. Place the
KRT-3
under the table in the desired location.
Make sure that the retracting cable faces the edge of the
table.
2. Pass the 3 M4x50 screws through the table screw openings
and tighten them to fix the retractor under the table.