Kramer KIT-401, Quick Start Manual

Page: 3 / 4

Step 3: Install KIT-401T and Mount KIT-400R
Install KIT-401T
Insert the device into the in-wall box. Note that first you need to connect the HDBT cable (and power
– if powering via the
transmitter) and connect the parts as shown in the illustrations below:
EU/UK Version US-D Version
DECORA® design frames are included in US-D models.
DECORA® is a registered trademark of Leviton Manufacturing Co., Inc.
We recommend that you use any of the following standard 2 gang in-wall junction boxes (or their equivalent):
•
US-D : 2 gang US electrical junction boxes.
•
EU : 2 gang in-wall junction box, with a cut-hole diameter of 2x68mm and depth that can fit in both the device and the
connected cables (DIN 49073).
•
UK : 2 gang in-wall junction box (BS 4662), 135x75mm (W, H) and depth that can fit in both the device and the
connected cables.
•
EU/UK : 2 gang on-wall junction box (use the recommended Kramer on-wall box available at
www.kramerav.com/product/KIT-401T ).
Mount KIT-400R
Install KIT-400R using one of the following methods:
•
Attach the rubber feet and place the unit on a flat surface.
•
Fasten 2 brackets (included) on each side of the unit and attach them to a flat surface
(see
www.kramerav.com/downloads/KIT-401
).
•
Mount the unit in a rack using the recommended rack adapter
(see
www.kramerav.com/product/KIT-401
).
•
Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
•
Maximum mounting height for the device is 2 meters.
Step 4: Connect inputs and outputs
Always switch OFF the power before connecting to your KIT-401 .
Connect the audio output:
To a
balanced
stereo
audio
acceptor:
To an
unbalanced
stereo
audio
acceptor:
To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/KIT-401 .
Using third-party cables may cause damage!