Kramer Electronics Ltd.
KIT-400
– Using Embedded Webpages
34
To configure network settings:
1. Click
Device Settings
from the Navigation Pane. The Device Settings page appears.
2. Click the
Communication
tab. The Communication tab appears.
Figure 19: Device Settings Page
– Communication Tab
3. Change the network settings as required.
–OR–
If you want the device to obtain an IP address via DHCP server, click DHCP
ON
.
4. Verify that the TCP/UDP port is correct.
5. Click
Set
.
The webpage logs out and the browser reloads with the new network information.
