Kramer Electronics Ltd.
KIT-400
– Operating and Controlling KIT-400
27
6. Select
Use the following IP Address
for static IP addressing and fill in the details as
For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to 192.168.1.255
(excluding 192.168.1.39) that is provided by your IT department.
Figure 15: Internet Protocol Properties Window
7. Click
OK
.
8. Click
Close
.
Connecting Ethernet Port via a Network Hub or Switch
You can connect the Ethernet port of
KIT-400
to
the Ethernet port on a network hub or using
a straight-through cable with RJ-45 connectors.
Configuring Ethernet Port
You can set the Ethernet parameters via the embedded webpages.
