KDS-SW3-EN7
Quick Start
P/N: 2 9 0 0 - 3 0 1 5 8 9 QS
Rev: 1
Scan for full manual
KDS-SW3-EN7 Quick Start Guide
This guide helps you install and use your
KDS-SW3-EN7
for the first time.
www.kramerav.com/downloads/KDS-SW3-EN7
to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check
what’s in the box
KDS-SW3-EN7
3x1 4K AVoIP
Switcher Encoder
2 Bracket sets
1 Quick start guide
Step 2: Get to know your KDS-SW3-EN7
#
Feature
Function
1
HDMI IN Connectors (1 and 2) Connect to an HDMI source.
2
USB-C IN Port
Connect to a USB-C source.
•
This port can receive video, audio and USB 2.0 data.
•
When powered by a Kramer 24V power supply (optional), charges sources (that
support USB Power Delivery 2.0) up to 60W.
3
LCD Display
Use for device configuration such as
setting the AV stream’s Ethernet transmission
channel.
4
Menu Navigation
Button
Press to return to the previous menu.
Press to move up to the next configuration parameter.
Press to go to the next menu.
Press to move down to the next configuration parameter.
Enter
Press to accept changes.
5
LINK LED
6
NET LED
7
ON LED
8
24V/5A DC Connector
Connect to the power adapter (purchased separately).
9
RESET Recessed Button
Press and hold for 10 seconds to reset the device to factory default values. All LEDs flash.
