Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your
KDS-SW3-EN7
.
KDS-SW3-EN7
and
KDS-DEC7
can stream 4K video, requiring a gigabit Ethernet switch for high quality performance, since the
maximum momentary transfer rate can reach 850Mbps. We recommend using AVoIP Ethernet switches that support: Multicast
forwarding or filtering, IGMP Snooping, IGMP Querier, IGMP snooping fast leave and Jumbo frame (8000 bytes or larger).
Connecting the audio input/output
To a balanced
stereo audio
source/acceptor:
To an unbalanced
stereo audio
acceptor:
To an unbalanced
stereo audio source:
To achieve specified extension distances, use the recommended Kramer cables available at
www.kramerav.com/product/KDS-SW3-EN7
Using third-party cables may cause damage!
Step 5: Connect power
By-default, the device uses PoE for powering the device.
Optionally, you can separately purchase a power adapter to connect to the product and plug into the mains electricity.
Safety Instructions (See www.kramerav.com for updated safety information)
Caution:
•
For products with relay terminals and GPIO ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User
Manual.
•
There are no operator serviceable parts inside the unit.
Warning:
•
Use only the power cord that is supplied with the unit.
•
Disconnect the power and unplug the unit from the wall before installing.