Kramer Electronics Ltd.
KDS-EN6, KDS-DEC6
– Console APIs
6
Version History
FW >= A7.0.0
Examples
Ex1: Start connect all services to ‘current’ channel. ‘current’ channel is by default got from on-
board 4-bits DIP switch. Only this command triggers FW to re-read 4-bits DIP switch value.
/ # e e_reconnect
/ #
Ex2: Start connect all services to c
hannel ‘9810’.
/ # e e_reconnect::9810
/ #
Ex3: Above command equals to following command:
/ # e e_reconnect::9810::Z
/ #
Ex4: Start connect ‘video over IP’ to channel ‘9810’. The others use ‘current’ channel.
/ # e e_reconnect::9810::v
/ #
Ex5: Use f
ollowing command (without specifying ‘functions’) can switch video under only 1
second.
/ # e e_reconnect::1222
/ #
Ex8: Connect ‘USB over IP’ to ‘169.254.2.3’
/ # e e_reconnect::169.254.2.3::u
/ #
"
Switchto X
", where X=Channel number command is a legacy command being used for
switch channel. It is still being supported but we strongly encourage to use e_reconnect
command instead. Its support will be discontinued in the next KDS-6 major release.