KDS-10
Quick Start
P/N:
2 9 0 0 - 3 0 1 3 8 7 QS
Rev:
1
Scan for full manual
KDS-10 Quick Start Guide
This guide helps you install and use your
KDS-10
for the first time.
www.kramerav.com/downloads/KDS-10
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check
what’s in the box
KDS-10
4K Video Encoder/Decoder
1 Power cord
4 Rubber feet
1 Quick start guide
Step 2: Get to know your KDS-10
FRONT PANEL
BACK PANEL
#
Feature
Function
1
USB
Type A
Port
For future use.
2
POWER LED
Lights when the device is powered ON.
Encoder Mode
Decoder Mode
3
LINK LEDs (1 & 2)
Each LED represents an HDMI
™ input
status.
White Flashing
= Device booting up.
Red
= Error.
•
HDMI In not connected.
•
Ethernet not connected.
Blue
= The stream is administratively
stopped via webpage interface.
Purple
= Waiting for an HDMI input
signal.
Green
= HDMI input signal detected.
LED 1 represents HDMI output. LED 2 is
non-functional.
White Flashing
= Device booting up.
Red
= Error.
•
HDMI Out not connected.
•
Ethernet not connected.
Blue
= The stream is administratively
stopped via webpage interface.
Purple
= Waiting for a connection to be
established.
Green
= HDMI output signal detected.
4
IN HDMI Connectors (1 to 2)
Connect to up to 2 HDMI sources.
5
OUT
HDMI Connector
Connect to an HDMI acceptor.
6
LAN RJ-45 Connector
Connect to the network using recommended Kramer cables.
7
AUDIO IN/OUT Balanced Stereo Audio
5-pin Terminal Block Connector
Connect to an analog audio acceptor or receiver.
8
CTRL Mini USB Connector
Connect to PC to send P3K commands to control device.
9
RESET button
Press and hold while powering on the device to reset to factory default parameters.
10
12V DC Connector
Connect to the power adapter.
Step 3: Mount KDS-10
Install
KDS-10
using one of the following methods:
•
Attach the rubber feet and place the unit on a flat surface.
•
Fasten a bracket (not included) on each side of the unit and attach it to a flat surface
www.kramerav.com/downloads/KDS-10
•
Mount the unit in a rack using the recommended rack adapter
www.kramerav.com/product/KDS-10
•
Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
•
Maximum mounting height for the device is 2 meters.
