6/4/08 3:09 AM
MusicYo.com - Tech Info
Page 3 of 3
http://www.musicyo.com/planet/metallist.asp
To adjust, fret the instrument at the 24th (or highest) fret. The distance from the bottom of the strings (both E's) to the
top of the pickup rails should be about 1/16th inch or about 1.0 - 1.5 mm. To adjust the pickup height, tighten or loosen
the two pickup mounting screws using a medium sized Phillips screwdriver.
10. Infinity String Sustainer Sensitivity Adjustment:
NOTICE: In general, this adjustment is PRESET at the factory and is NOT necessary. Therefore, to avoid potential
problems, this should only be attempted as needed or by advanced users.
The Infinity String Sustainer Sensitivity Adjustment is located on the electronic circuit board inside the large back cavity.
To access, remove the 8 screws using a small headed Phillips screwdriver and carefully remove the cover. Adjustment
is made using a very small, eyeglass-type flat or Phillips head screwdriver.
Turning the trim-pot counter-clockwise reduces the sensitivity while a clockwise adjustment increases the sensitivity.
Kramer is a registered trademark of Gibson Musical Instruments. Infinity Sustainer is a trademark of Round Delay
Music.
© 2008
, A part of the
family of brands.