Kramer Electronics Ltd.
FC-7P
– Introduction
3
For example, using Kramer
K-Touch
control software you can design advanced room-control
and automation systems that can be operated from iOS or Android touch devices.
K-Touch
can be used to perform device discovery over the network as the
FC-7P
is set to be a DHCP
client by default.
You can use the Kramer
LAN Configurator
software to discover devices that are attached to
the network, including the
FC-7P
.
Typical Applications
FC-7P
is ideal for the following typical applications:
•
Remote IP control of GPIO and relay-controllable devices by any control software app
•
K-Touch multi-clients IP room control
•
LAN-based expansion of K-Config control system