Kramer FC-6801, User Manual

Page: 6 / 16

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your SDI De-Embedder
4
Table 1: Front Panel FC-6801 SDI De-Embedder
# Feature Function
1 POWER Switch Illuminated switch supplying power to the unit
2 GROUP SELECT Button Press to select the desired group
1
3 CHANNEL Green LEDs Automatically indicate the active channels
2
4 GROUP Green LEDs Indicate the selected group (1, 2, 3, or 4)
5 24 bit Red LED Automatically lights when the AES/EBU stream is 24 bit
6 20 bit Red LED Automatically lights when the AES/EBU stream is 20 bit
7 DEMUX Red LED
Automatically lights when de-embedding audio from the video signal
8
LO
C
K
VIDEO Red LED
Automatically lights when receiving an SDI signal
9 PAL Red LED Lights when recognizing a PAL input video standard
10 NTSC Red LED Lights when recognizing an NTSC input video standard
11 GAIN 1-2 Knob Adjusts the gain level of the analog outputs 1 and 2
12 GAIN 3-4 Knob Adjusts the gain level of the analog outputs 3 and 4
Table 2: Rear Panel FC FC-6801 SDI De-Embedder
# Feature Function
1 LOOP BNC Connector Reclocked and equalized SDI output for active looping of the
SDI input
3
2 INPUT BNC Connector Connects to the SDI source
3 OUT 1 BNC Connector Connects to the SDI
4
acceptor 1
5
4
S
D
I
OUT 2 BNC Connector Connects to the SDI
4
acceptor 2
5
5 AUDIO DELAY Dipswitches Dipswitches for setup of the delay time
6
DIPS 1 to 7 determine the delay
DIP 8 determines if audio delay is set via RS-232 (ON) or via
the dipswitches (OFF)
6 CH. 1-2 BNC Connector Connects to the digital audio acceptor (for channels 1 and 2)
7
7
A
E
S
O
U
T
CH. 3-4 BNC Connector Connects to the digital audio acceptor (for channels 3 and 4)
7
8 ANALOG AUDIO OUT XLR Male
Connectors
Connect to the balanced audio acceptors (from 1 to 4)
5
9 RS-232 Port Connects to the PC or the Remote Controller
10 Power Connector with Fuse AC connector enabling power supply to the unit
1 If the selected group contains audio channels, the CHANNEL Green LEDs will automatically indicate those channels
2 Either 2 LEDs, 4 LEDs, or no LEDs will light
3 See the example in Figure 4
4 De-embedded, reclocked and equalized SDI output
5 As required. Outputs may be connected or left unconnected
6 Total delay per AES channel is 1.024 seconds in 8 msec steps (8 msec x 128 = 1.024 seconds)
7 In accordance with the standard, the audio digital stream contains 2 audio channels