Kramer FC-4001 User Manual Download Page 11

Technical Specifications 

 

 

9

7  Technical Specifications 

Table 6 includes the technical specifications: 

Table 6: Technical Specifications

1

 of the FC-4001 Format Converter / TBC 

INPUTS: 

1 composite video - 1 Vpp / 75  on a BNC connector 
1 YC - 1 Vpp/75  (Y), 0.3Vpp/75  on a 4p connector 
1 component - Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp) /75  (or RGB/S) on BNC 

connectors 

1 SDI: SMPTE-259M, ITU-R BT.601 on a BNC connector 
1 SYNC (Genlock): Looped 75  / Hi-Z on BNC connectors 

OUTPUTS: 

1 composite video on a BNC connector 1 Vpp/75  
1 YC video on 2 BNC connectors: Y 1 Vpp/75 , and C 0.3Vpp/75  
1 component or RGB/S video on BNC connectors 1Vpp/0.7Vpp/0.7Vpp/75  
1 SYNC on a BNC connector 
2 SDI: SMPTE-259M, ITU-R BT.601 on BNC connectors 

VIDEO STANDARDS: 

PAL-B/D/G/H/I/M/N, NTSC-3.58/4.43, SECAM 

DIGITAL RESOLUTION: 

10 bits 

BANDWIDTH (-3dB): 

0.5dB to 5MHz, Fully Loaded 

DIFF. GAIN: 

1% 

DIFF. PHASE: 

1 Deg. 

K-FACTOR: 

1% 

S/N RATIO: 

63dB 

LUMA NON-LINEARITY: 

1% 

CHROMA / LUMA DELAY:  1ns 
CONTROLS: 

Front-panel and RS-232; SCH phase, SYNC phase, H shift, freeze, panel 

lock 

POWER SOURCE: 

100-240VAC, 50/60Hz, 14VA 

DIMENSIONS: 

19 inch (W), 7 inch (D), 1U (H) rack mountable 

WEIGHT: 

2.6 kg. (5.7 lbs.) approx. 

ACCESSORIES: 

Power cord, Null-modem Adapter 

8  Communication Protocol 

RS-232 communication between the 

FC-4001

 and the PC is performed using 

this protocol (VER-0.1), which uses four bytes of information, and data is at 

9600 baud, no parity, 8 data bits and 1 stop bit. 
The controller and the machine should be connected via a null-modem 

connection, that is, if using a DB-9 port, connect PIN 5 of the PC to PIN 5 of 

the machine, cross PINs 2 and 3, that is, connect PIN 2 of the PC to PIN 3 of 

the machine, and connect PIN 3 of the PC to PIN 2 of the machine. On the PC 

side, short PINs 4 and 6, and short PINs 1, 7 and 8. This protocol 

complements Kramer’s “Protocol 2000” (Kramer’s switcher protocol), that is, 

the two protocols can co-exist without disturbing one another (according to 

Protocol 2000’s definitions, the 

FC-4001

 would be machine number 24). 

                                                        

1 Specifications are subject to change without notice 

Summary of Contents for FC-4001
















Reviews: