Kramer FC-21ETH, User Manual

Page: 12 / 60

8 Defining the FC-21ETH, FC-22ETH and
FC-24ETH Ethernet Controllers
4.2 Defining the FC-22ETH Ethernet Controller
Figure 3 defines the front panel of the FC-22ETH.
Figure 3: FC-22ETH Ethernet Controller Front Panel
# Feature Function
1 ON LED Lights green when the unit is on
2
ETHERNET
LEDs
CONNECTED Lights yellow when the Ethernet port is connected
DATA Flashes green when data is transferred over the
Ethernet link
3
SERIAL 1
LEDs
RS-232 Lights green when RS-232 is selected
RS-485 Lights green when RS-485 is selected
4
SERIAL I/Os
1
LEDs
Tx Flashes red when the device is transmitting data over
serial port 1
Rx Flashes green when the device is receiving data on
serial port 1
5
SERIAL I/Os
2
LEDs
Tx Flashes red when the device is transmitting data over
serial port 2
Rx Flashes green when the device is receiving data on
serial port 2
6
DHCP
ON LED Lights green when DHCP is selected
7 Button Selects either DHCP or static IP addressing, (see
Section
‎8.3
).
Press to toggle the selection between DHCP and
static IP addressing
8 FACTORY DEFAULT Button Press and hold while power-cycling the device to
reset to factory default parameters, (see
Section
‎10
)