Kramer F-021, User Manual

Page: 8 / 14

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing the F-021 XGA / Audio Line Amplifier Mounting Box
6
5.2.1 Wiring the 18-pin Terminal Block Output Connector
The 18-pin terminal block is an easy plug-in connector for attaching the
outputs. Follow the colors of the color-coded sticker on these terminals for
proper connection of the UTP cable.
Figure 2 defines the pinout for the
terminal block.
GND
12V
Audio
Video
EDID
Power
Figure 2: Terminal Block Pinout
Note :
•
Use the connector clips only when removing wires, not when inserting
them
•
Each wire should protrude 9mm (0.35") from the plastic insulation so
that it can be easily connected. Be sure to fully insert each wire to
prevent them from crossing