Using the VM-2HDMI 1:2 HDMI Distributor
7
Figure 3: Connecting a VM-2HDMI 1:2 HDMI Distributor
5.2 Using the VM-2HDMI EDID SETUP Button
Initially, the
VM-2HDMI
operates with the factory default EDID
1
. This lets
you connect the power before connecting either of the acceptors or the source.
You can acquire the EDID From:
The Default EDID (both output LEDs blink)
One Output (the relevant output illuminates)
You can also acquire the Clone EDID which copies the EDID data from the
acceptor bit-by-bit.
1 The VM-2HDMI reads the EDID, which is stored in the non-volatile memory