Using Your 7408 SDI to Analog Converter
5
5
Using Your 7408 SDI to Analog Converter
You can use your
7408 SDI to Analog Converter
to convert SDI video to
professional analog video: composite video and s-Video, or component
video (as the example in
Figure 2
illustrates).
5.1
Connecting Your 7408 SDI to Analog Converter
To connect the
7408
, do the following
1
:
1.
Connect the SDI source (for example, a digital camera) to the SDI
IN BNC connector. You may also connect the SDI OUT BNC
connector to an SDI acceptor (such as an SDI monitor).
2.
Connect the following:
An s-video acceptor (such as an s-video monitor) to the C
−
Y
output BNC connectors; and/or,
A composite video acceptor, such as a composite video monitor
to the CV output BNC connector; or,
A component video acceptor, such as a VCR, to the YUV BNC
connectors
3.
Connect a PC (if required) to the RS-232 port (see section
5.2
).
4.
Set the DIP-switches, as section
5.2
describes.
5.
Connect the 12V DC power adapter to the power socket and
connect the adapter to the mains electricity.
Warning
:
Do not cover the
7408
1 Switch OFF the power on each device before connecting it to your 7408. After connecting your 7408, switch on its power
and then switch on the power on each device
