Kramer Electronics Ltd.
AFM-20DSP
– Using Embedded Webpages
19
Accessing the AFM-20DSP Webpages
To browse the AFM-20DSP webpages:
1. Open a supported browser.
2. Enter the IP address of the device. The authentication page opens.
3. Enter the Username and Password (by default Admin/Admin).
4. Click
Sign in
. The Main webpage opens.
Note
– To hide the Navigation List, click the arrow below the
About
icon.
Figure 11: Main Page
– Navigation List Hidden
5. To set and control the device, click the applicable icon in the Navigation List.
Using the Top Status Bar
Use the top status bar to do the following functions:
•
Viewing/Changing Current Analog I/O Configuration and Preset Name
•
Note
– To enter/exit full-screen display view, click the display-view icon (
/
).
Viewing/Changing Current Analog I/O Configuration and Preset
Name
In the top pane of each menu bar, shows the analog I/O setup, the preset name, and the
status of the setup.